This equipment is applicable to various circuit boards. The aluminum base plate can be cut in blocks with a maximum height of 1.23m and a thickness of 3cm. The cutting section is smooth without burrs. The 90 degree right angle has an error within 0.1mm. The cutting speed is fast and the working efficiency is high
This equipment is suitable for cutting various circuit boards and aluminum base plates in blocks
The maximum cutting height can reach 1.23m, the thickness can reach 3cm, the cutting section is smooth without burr, 90 degree right angle, the error is within 0.1mm, the cutting speed is fast, and the working efficiency is high. The structure is reasonable, the electrical part is controlled by PLC, the human-machine interface is very humanized, the operation is simple, safe and reliable, and the failure rate is small.
This machine is one of the necessary equipment for printing large assembly line production. Carbide cutter is applicable to ordinary paper copper clad laminate; Diamond cutter is applicable to: FR4, CEM-1, CEM-3
Technical parameters:
Size range of processed plate: length 50-3000mm width: 0m-1230mm
Power supply: 5.5KW 380V/3P
Compressed air 5.5KG/cm2
Air consumption: less than 0.1m ³/ min
Maximum working cycle: 25s
Main body size: L2200MM * W1500MM * H1900MM
Shopping Mall
Tiktok
LINE
